Top 8 Brass Lamp Holder UK – Lamp Bases

As an Amazon Associate I earn from qualifying purchases.

1. ElekTek

ElekTek Safety Switch Lamp Bulb Holder 10mm Entry BC B22 with Shade Ring and Locking Screw in Base Brass

ElekTek - Please check your thread size before ordering: The female entry thread in the base of this lamp holder is M10 or 10mm. Safety locking screw in base for secure fitting. Switch will not operate without a bulb fitted - also ensure both halves of lamp HOLDER ARE SCREWED TOGETHER PROPERLY. Metal light fittings must be earthed - earth terminals are present. Solid brass - uk maDE - Premium product.
Part Number.

2. ElekTek

ElekTek Lamp Holder Un-Switched Bayonet Cap B22 Half Inch Entry with Shade Ring Brass

ElekTek - This 22mm bc bayonet connector lamp holder is intended primarily for attachment to a male 1/2" threaded connector. Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use beware of cheaper, pressed type bases that cannot carry a locking screw. Standard b22 22mm bayonet cap fitting, unswitched, with shade ring. Maximum assembled, fitted height 48mm. All metal light fittings must be earthed.
Part NumberL066

3. ElekTek

Brass Lamp Holder Fixed Batten SBC B15 Shade Ring

ElekTek - Made in the uk. Complete with earth terminal, shade ring, brass plunger contacts & ceramic interior. This solid brass sbc b15 15mm small bayonet connector batten lamp holder is intended primarily for attachment to flat surfaces. It is not b22 size the larger standard UK B22 bayonet size. This product is suitable for lighting circuits only. Sbc b15 15mm small bayonet cap, maximum height 32mm, Base diameter 38mm, 3 Fixing holes on 30mm PCD. This lamp holder is the smaller size 15mm small bayonet cap standard uk bayonet fitting. T2 temperature rating 220°C.
ManufacturerBuy It Better
Part NumberL007

4. ktjes

2 Pack Vintage Brass Lamp Holder Switch Light Bulb Socket Fitting Set E27 with ON/Off

ktjes - 2 pack of switch e27 lamp holder, Vintage Brass looking. Comes with black cord grip. 10mm threaded entry. Built-in on/off switch. The light holder operating at max 250 volts, max wattage: 60W.
ManufacturerShenzhenshi yifengshunmaoyi youxianzerengongsi
Part Numberktjes-HOLDER-03

5. ElekTek

Brass, ElekTek B22 BC Batten Lamp Holder 52mm Diameter Base 3 Fixing Holes

ElekTek - Made in the UK. 3 fixing holes on 40mm centres PCD, Base diameter 52mm, Maximum height 39mm. B22 22mm bayonet Cap with shade ring. Please check your bulb cap type & size before ordering. Ceramic interior with Earth terminal and brass plunger contacts.

6. Art Deco Emporium

B22 Solid Brass Earthed Lamp Bulb Holder with 10mm Threaded Entry

Art Deco Emporium - Assembled and tested by trusted UK supplier of vintage lighting. Unique distinctive art deco styling. All top quality components. Fully ce, uk, european & us regulations compliant. Grounded with internal screw terminals.
BrandArt Deco Emporium
ManufacturerArt Deco Emporium Ltd.
Height3.3 cm (1.3 Inches)
Length3.6 cm (1.42 Inches)
Weight0.04 kg (0.09 Pounds)
Width3.3 cm (1.3 Inches)
Part NumberLHB22-R00-BRS

7. ElekTek

Brass Safety Switch Lamp Holder 10MM BC B22 with Shade Ring *** Made in UK ***

ElekTek - Safety locking screw in base for secure fitting. Solid brass - uk maDE - Premium product. Safety switch will not operate without a bulb fitted. Metal light fittings must be earthed - earth terminals are present.
Part NumberL003


PIANUO Brass Retro Lamp Holder with Switch Screw Fit E27 for Antique Edison Bulb Pendent Light Wall Scone DIY

PIANUO - Total Height: 6. 8cm, base Diameter: 3. 2cm. This retro brass lamp holder with ce certificatIONis ideal for bare bulb features with E27 Edison Screw Bulbs Style.

Lamp brass holder is a great addition to any style space with an exposed vintage bulb, providing ambiance and taste for vintage fixtures. The brass light holder works at max 250 volts, max wattage: 60W. Light source type: incandescent, Edison light bulb, Filament Lamp Bulb as show in the picutrebulb not include in this item. Antique bulb holder could assemble to a socket and cord for a hardwired lighting with an exposed bulb for a new fitting DIY.
Part Number.