As an Amazon Associate I earn from qualifying purchases.1. ElekTek
ElekTek Safety Switch Lamp Bulb Holder 10mm Entry BC B22 with Shade Ring and Locking Screw in Base Brass
ElekTek - Solid brass - uk maDE - Premium product. Metal light fittings must be earthed - earth terminals are present. Please check your thread size before ordering: The female entry thread in the base of this lamp holder is M10 or 10mm.
Safety locking screw in base for secure fitting. Switch will not operate without a bulb fitted - also ensure both halves of lamp HOLDER ARE SCREWED TOGETHER PROPERLY.
2. MASUNN
MASUNN B22 Standard White Black Switch Light Lamp Holder Socket Bayonet Cap Fitting, White
MASUNN - Name:b22 standard Lamp Holder with switch. Rated voltage:250V. 1 x lamp Holder. Color:black, White. Rated current:2A.
3. ElekTek
ElekTek Lamp Holder Un-Switched Bayonet Cap B22 Half Inch Entry with Shade Ring Brass
ElekTek - All metal light fittings must be earthed. This 22mm bc bayonet connector lamp holder is intended primarily for attachment to a male 1/2" threaded connector. Standard b22 22mm bayonet cap fitting, unswitched, with shade ring.
Maximum assembled, fitted height 48mm. Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use beware of cheaper, pressed type bases that cannot carry a locking screw.
4. ElekTek
Premium Lamp Kit Brass Safety Switch B22 Lamp Holder with Twisted Gold Flex and 3A UK Plug
ElekTek - Perfect for creating a new lighting project or refurbishing an old table lamp. To ensure electrical regulations are met two types of strain relief are provided. The included comprehensive lamp kit Accessory Selection contains all the common parts necessary to refurbish, or create a lamp with either a ceramic/glass or drilled wooden base.
Extra components are provided to ensure maximum compatibility with existing parts. All electrical work should be undertaken by persons competent in the wiring and installation of these items. If in any doubt, please consult a qualified electrician.
5. Buy It Better
Antique Brass, ElekTek Lamp Holder Fixed Batten BC B22 with Shade Ring
Buy It Better - T2 temperature rating 220°C. Fits a standard b22 22mm Bayonet Cap Bulb. This b22 bayonet connector batten lamp holder is intended primarily for attachment to a flat surface.
Complete with shade ring, earth terminal, ceramic interior, brass plunger contacts. Base diameter 68. 6mm, maximum height 39mm, 2 Fixing holes on 50mm centres BESA. Made in the UK. This product is suitable for lighting circuits only.
6. SourceDIY
Dimmer And British Standard Plug, Salt Lamp Replacement Light Fitting With Dimmer Switch + 4 Units Of 15 Watt E14 Incandescent Oven Bulb. Black Power Cord Cable Comes With Certified E14 Bulb Holder
SourceDIY - Multipurpose- bulb holder comes with a butterfly clip to facilitate the wide variety of Uses. Box content- each box contains 1 unit of power cord fitted dimmer cable, e14 ses bulb holder, 1. 5 meter cable length & british standard 3 pin plug and 4 units of long lasting e14 15 watt Oven Bulbs ⭐⭐⭐⭐⭐COMES WITH 30 DAYS MONEY BACK GUARANTEE.
Easy to install- power cord and bulbs designed to facilitate the easy installation to enhance the User Experience.
Perfect replacementcan fit to any e14 small Edison Screw SES Fitting i. E. Safety firsttested up to the 🇬🇧 british and 🇪🇺 Ce Certification Standards. Control the Brightness By Rotating the Dimmer. Dimmer switch- unique dimmer switch technology makes The Intended Use Appliance Full Of Advancement.
Bulb- premium quality dimmable incandescent filament bulb comes with an expected life of ⏳ 1, refrigerator, Night Light, Oven, fridge, industrial oven, 000 Hours And Provides 85 Lumen Warm Light. Salt lamp, Range Hood, Microwave. Mainly designed to use with all shapes and Sizes Of Himayalan Salt Lamps And All Other Lamps With Or Without Butterfly Clips.
| Brand | SourceDIY |
| Manufacturer | SourceDIY |
| Height | 2.5 cm (0.98 Inches) |
| Length | 12 cm (4.72 Inches) |
| Width | 12 cm (4.72 Inches) |
7. SourceDIY
Button and British Standard Plug, Salt Lamp Replacement Light Fitting with Button Switch + 4 Units of 15 Watt E14 Incandescent Oven Bulb. White Power Cord Cable Comes with Certified E14 Bulb Holder
SourceDIY - Package contain one unit of button cable with 1. 5 meter length - one units of 15 Watt E14 Bulb. Fit in different size of salt lamps. Sourcediy cord is ce certified and comes with standard UK Plug and with the Butterfly clip design, With the Flexibility to Fit in different size of salt lamps.
Cord designed especially for himalayan salt lamps to on/off the light. Original cord with Button Switch that can help you on/off the lamp. Length is 1. 5 meter and comes with E14 Bulb Holder. It can also be used with other types of lamps. Perfect replacement cord for your Salt Lamps.
| Brand | SourceDIY |
| Manufacturer | SourceDIY |
| Height | 2.5 cm (0.98 Inches) |
| Length | 12 cm (4.72 Inches) |
| Width | 12 cm (4.72 Inches) |
8. SourceDIY
CE Certified British Standard Plug, Salt Lamp Replacement Light Fitting with Touch Dimmer Switch + 4 Units of 15 Watt E14 Bulb. White Power Cord Comes with E14 Bulb Holder
SourceDIY - Mainly designed to use with all shapes and Sizes Of Himayalan Salt Lamps And All Other Lamps With Or Without Butterfly Clips. A single touch will on/off the device and slight Hold On Touch Helps To Adjust The Light For A Cosy And Warm Environment. Perfect replacementcan fit to any e14 small Edison Screw SES Fitting i.
E. Touch dimmer- unique touch dimmer technology makes the intended use appliance full of advancement. Bulb- premium quality dimmable incandescent filament bulb comes with an expected life of ⏳ 1, Night Light, Range Hood, refrigerator, industrial oven, oven, fridge, 000 Hours And Provides 85 Lumen Warm Light.
Salt lamp, Microwave. Multipurpose- bulb holder comes with a butterfly clip to facilitate the wide variety of Uses.
Safety firsttested up to the 🇬🇧 british and 🇪🇺 Ce Certification Standards. Control the brightness By Touching The Hand Logo. Easy to install- power cord and bulbs designed to facilitate the easy installation to enhance the User Experience. Box content- each box contains 1 unit of power cord fitted touch dimmer, e14 ses bulb holder, 1. 5 meter cable length & british standard 3 pin plug and 4 units of long lasting e14 15 watt Oven Bulbs ⭐⭐⭐⭐⭐COMES WITH 30 DAYS MONEY BACK GUARANTEE.
ElekTek - Solid brass - uk maDE - Premium product. Metal light fittings must be earthed - earth terminals are present. Please check your thread size before ordering: The female entry thread in the base of this lamp holder is M10 or 10mm. Safety locking screw in base for secure fitting. Switch will not operate without a bulb fitted - also ensure both halves of lamp HOLDER ARE SCREWED TOGETHER PROPERLY.
MASUNN - Name:b22 standard Lamp Holder with switch. Rated voltage:250V. 1 x lamp Holder. Color:black, White. Rated current:2A.
ElekTek - All metal light fittings must be earthed. This 22mm bc bayonet connector lamp holder is intended primarily for attachment to a male 1/2" threaded connector. Standard b22 22mm bayonet cap fitting, unswitched, with shade ring. Maximum assembled, fitted height 48mm. Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use beware of cheaper, pressed type bases that cannot carry a locking screw.
Buy It Better - T2 temperature rating 220°C. Fits a standard b22 22mm Bayonet Cap Bulb. This b22 bayonet connector batten lamp holder is intended primarily for attachment to a flat surface. Complete with shade ring, earth terminal, ceramic interior, brass plunger contacts. Base diameter 68. 6mm, maximum height 39mm, 2 Fixing holes on 50mm centres BESA. Made in the UK. This product is suitable for lighting circuits only.
SourceDIY - Multipurpose- bulb holder comes with a butterfly clip to facilitate the wide variety of Uses. Box content- each box contains 1 unit of power cord fitted dimmer cable, e14 ses bulb holder, 1. 5 meter cable length & british standard 3 pin plug and 4 units of long lasting e14 15 watt Oven Bulbs ⭐⭐⭐⭐⭐COMES WITH 30 DAYS MONEY BACK GUARANTEE.
SourceDIY - Package contain one unit of button cable with 1. 5 meter length - one units of 15 Watt E14 Bulb. Fit in different size of salt lamps. Sourcediy cord is ce certified and comes with standard UK Plug and with the Butterfly clip design, With the Flexibility to Fit in different size of salt lamps. Cord designed especially for himalayan salt lamps to on/off the light. Original cord with Button Switch that can help you on/off the lamp. Length is 1. 5 meter and comes with E14 Bulb Holder. It can also be used with other types of lamps. Perfect replacement cord for your Salt Lamps.
SourceDIY - Mainly designed to use with all shapes and Sizes Of Himayalan Salt Lamps And All Other Lamps With Or Without Butterfly Clips. A single touch will on/off the device and slight Hold On Touch Helps To Adjust The Light For A Cosy And Warm Environment. Perfect replacementcan fit to any e14 small Edison Screw SES Fitting i.
